XENTRY Diagnosis Kit 4 consists, as usual, of two components: XENTRY Diagnosis Pad 2 and XENTRY Diagnosis VCI. The device concept is comparable with that of its predecessor XENTRY Diagnosis Kit 3.
XENTRY Diagnosis Kit 4 now offers many more advantages in comparison to XENTRY Diagnosis Kit 3.
Easier to use
The display is a 13.3 inch, multitouch, full HD display with a brightness of 400 nits.
XENTRY Diagnosis Pad 2 comes with four USB type A 3.0 ports and one USB type C port
Located on the front side are two buttons that you can configure individually using ConfigAssist
To provide a more stable WiFi connection to XENTRY Diagnosis VCI, a second WiFi card has been installed, the WiFi stick in the XENTRY Diagnosis Pad 2 has been discontinued.
Much faster
XENTRY Diagnosis Pad 2 comes with the latest Intel® CoreTM i5 processor (1.6 GHz, turbo up to 3.9 GHz)
The main memory has 16 GB DDR4
1 TB SSD hard drive (with 3000 MB/s read and write speed)
More convenient
The connection to XENTRY Diagnosis VCI is made using a permanently installed WLAN card.
XENTRY Diagnosis Pad 2 is passively cooled and therefore it does not have a fan.
XENTRY Diagnosis Pad 2 can be run on battery power for up to 8 hours.
Technical Specifications
XENTRY Diagnosis Pad 2 technical data
Feature
Operating system
Windows 10 IoT LTSC Enterprise
Processor
Intel® CoreTM i5
Main memory
16 GB DDR4
Hard drive
1 TB SSD
Display
13.3″, full HD multitouch, brightness 400 nits, resolution 1920 x 1080, antiglare
Dimension
Wait approx. 338 x 240 x 33 mm (W x L x H)
Weight
2.3 kg
XENTRY Diagnosis VCI
The VCI used so successfully before in XENTRY Diagnosis Kit 3 is also part of the scope of supply for XENTRY Diagnosis Kit 4.
Product advantages
The practical multiplexer in a compact and sturdy design (no PC core, battery, fan, or display)
No more diagnosis updates required – only firmware updates on rare occasions
Can be used for all model series
Does not require an adapter for an external power supply
XENTRY Diagnosis VCI
XENTRY Diagnosis VCI technical data
Feature
Network connection
Cabled
USB 2.0
WiFi stick
802.11b/g/n
Processor system
Microprocessor
Intel MX6 Solo
RAM
RAM: 512 MB DDR3 RAM
ROM
512 MB flash
User interface
LEDs
5 status LEDs
Power supply*
From the vehicle battery via the diagnosis connection cable
or via a connected USB cable.
8 V to 28 V
Certifications
VCI
FCC, CE, RoHS
*Important: The contact socket in the vehicle must be protected with a fuse with a maximum rating of 6 A/32 V.
Based on 0 reviews
0 overall
0%
0
0%
0
0%
0
0%
0
0%
0
There are no reviews yet.
Be the first to review “Mercedes Xentry Diagnosis Kit 4 with SCN Online” Cancel reply
There are no reviews yet.